Fiat Punto EVO 1.4 16v 78 hp — Stage 1 file (+7 hp)
hp
Stage 1 file for Fiat Punto EVO 1.4 16v 78 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Punto EVO 1.4 16v 78 hp ECU
Fiat Punto EVO (2010) 1.4 16v 78 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 78 to 85 hp (+7 hp, +9%) and torque from 120 to 130 Nm (+10 Nm). This engine ships with different ECU variants: Marelli 9GF, Bosch ME7.9.10. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Fiat is an Italian carmaker from Turin, founded in 1899. MultiAir is Fiat's intake-valve control system. Fiat shares some ECUs and algorithms with Alfa Romeo and Lancia. Low-output Fiat petrol engines are naturally aspirated city-segment units; the gain is modest.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. On pre-2017 Fiat models, Stage 1 is done via OBD without bench. Low-output Fiat engines are city units, and Stage 1 is safe on them. On naturally aspirated Fiat engines the main effect is sharper throttle response.
Frequently asked questions
What power gain do you get after chip tuning the Fiat Punto EVO 1.4 16v 78 hp?
The Stage 1 gain for the Fiat Punto EVO 1.4 16v 78 hp is 7 hp (+9%) over the stock 78 hp, for a total of 85 hp. Torque rises from 120 to 130 Nm (+10 Nm).
What is Stage 1 chip tuning for the Fiat Punto EVO?
Stage 1 chip tuning of the Fiat Punto EVO is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +7 hp with no hardware changes.
What does chip tuning give on the low-output Fiat Punto EVO 1.4 16v 78 hp?
Stage 1 on the base Fiat Punto EVO is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Fiat Punto EVO?
Stage 2 on the Fiat Punto EVO 1.4 16v 78 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Fiat Punto EVO 1.4 16v 78 hp?
The Fiat Punto EVO 1.4 16v 78 hp was fitted with different ECUs depending on the year and trim: Marelli 9GF, Bosch ME7.9.10. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Fiat Punto EVO warranty after chip tuning?
The factory warranty of the Fiat Punto EVO does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Fiat Punto EVO take?
On the Fiat Punto EVO 1.4 16v 78 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Fiat Punto EVO?
Yes, the original ECU firmware of the Fiat Punto EVO 1.4 16v 78 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Fiat Punto EVO?
Stage 1 for the Fiat Punto EVO 1.4 16v 78 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.