Fiat Punto EVO 1.2 8v 69 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Fiat Punto EVO 1.2 8v 69 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Punto EVO 1.2 8v 69 hp ECU
Fiat Punto EVO (2010) 1.2 8v 69 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 69 to 75 hp (+6 hp, +9%) and torque from 102 to 112 Nm (+10 Nm). ECU — Marelli 9GF. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Fiat sits alongside brands such as Abarth, Lancia and Alfa Romeo (via Stellantis). Fiat's petrol range consists of compact turbo and naturally aspirated engines for the urban segment. TwinAir is Fiat's signature designation for its two-cylinder turbo engines in the micro segment. MultiAir is Fiat's intake-valve control system.
Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. On pre-2017 Fiat models, Stage 1 is done via OBD without bench. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Low-output Fiat engines are city units, and Stage 1 is safe on them. On naturally aspirated Fiat engines the main effect is sharper throttle response.
Frequently asked questions
How much does the power of the Fiat Punto EVO 1.2 8v 69 hp increase after Stage 1?
The Stage 1 gain for the Fiat Punto EVO 1.2 8v 69 hp is 6 hp (+9%) over the stock 69 hp, for a total of 75 hp. Torque rises from 102 to 112 Nm (+10 Nm).
What is Stage 1 chip tuning for the Fiat Punto EVO?
Stage 1 on the Fiat Punto EVO 1.2 8v 69 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +6 hp with no hardware changes.
Is Stage 1 safe for the low-output Fiat Punto EVO 1.2 8v 69 hp?
Stage 1 on the base Fiat Punto EVO is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Fiat Punto EVO 1.2 8v 69 hp?
Stage 2 on the Fiat Punto EVO 1.2 8v 69 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Fiat Punto EVO 1.2 8v 69 hp run?
The control unit of the Fiat Punto EVO 1.2 8v 69 hp is the Marelli 9GF. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Fiat Punto EVO?
Stage 1 on the Fiat Punto EVO voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fiat Punto EVO 1.2 8v 69 hp done?
The full remap cycle for the Fiat Punto EVO — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fiat Punto EVO?
The original Fiat Punto EVO ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fiat Punto EVO 1.2 8v 69 hp?
The cost of Stage 1 for the Fiat Punto EVO 1.2 8v 69 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.