Fiat Marea 2.4 JTD 130 hp — Stage 1 file (+36 hp)
hp
Stage 1 file for Fiat Marea 2.4 JTD 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Marea 2.4 JTD 130 hp ECU
Fiat Marea (1996) 2.4 JTD 130 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 130 to 166 hp (+36 hp, +28%) and torque from 304 to 355 Nm (+51 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. The 1996 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
MultiAir is Fiat's own valve-control technology. Mid-range Fiat diesels are a high-volume chip tuning subject in Italy.
On Fiat diesels, Stage 1 delivers a noticeable torque gain. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Fiat Marea 2.4 JTD 130 hp?
After Stage 1 the power of the Fiat Marea 2.4 JTD 130 hp rises from 130 to 166 hp, a gain of 36 hp (+28%). Torque rises from 304 to 355 Nm (+51 Nm).
How does Stage 1 differ from stock on the Fiat Marea?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Marea with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +36 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Marea 2.4 JTD 130 hp?
A remap of the Fiat Marea 2.4 JTD 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Marea 2.4 JTD 130 hp?
Stage 2 on the Fiat Marea 2.4 JTD 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat Marea 2.4 JTD 130 hp use?
The Fiat Marea 2.4 JTD 130 hp is fitted with the Bosch EDC15C7 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Marea remain valid after Stage 1?
After remapping the Fiat Marea, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Marea?
Reading and writing via OBD takes 25-30 minutes on the Fiat Marea. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Marea?
Before Stage 1 the original of the Fiat Marea 2.4 JTD 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Marea 2.4 JTD 130 hp cost?
The remap price for the Fiat Marea 2.4 JTD 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.