Fiat Marea 1.9 JTD 105 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Fiat Marea 1.9 JTD 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Marea 1.9 JTD 105 hp ECU
Fiat Marea (1996) 1.9 JTD 105 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 105 to 135 hp (+30 hp, +29%) and torque from 255 to 310 Nm (+55 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. The 1996 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Fiat range covers compacts, saloons, crossovers and commercial models. On older Fiat diesels, Stage 1 goes in via OBD with no complications.
Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. On Fiat diesels, Stage 1 delivers a noticeable torque gain. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
How much does the power of the Fiat Marea 1.9 JTD 105 hp increase after Stage 1?
The Stage 1 gain for the Fiat Marea 1.9 JTD 105 hp is 30 hp (+29%) over the stock 105 hp, for a total of 135 hp. Torque rises from 255 to 310 Nm (+55 Nm).
What is Stage 1 chip tuning for the Fiat Marea?
Stage 1 on the Fiat Marea 1.9 JTD 105 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9 JTD 105 hp?
Stage 1 on the Fiat Marea 1.9 JTD 105 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fiat Marea 1.9 JTD 105 hp?
Stage 2 on the Fiat Marea 1.9 JTD 105 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Fiat Marea 1.9 JTD 105 hp run?
The control unit of the Fiat Marea 1.9 JTD 105 hp is the Bosch EDC15C7. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Fiat Marea?
Stage 1 on the Fiat Marea voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fiat Marea 1.9 JTD 105 hp done?
The full remap cycle for the Fiat Marea — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fiat Marea?
The original Fiat Marea ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fiat Marea 1.9 JTD 105 hp?
The cost of Stage 1 for the Fiat Marea 1.9 JTD 105 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.