Fiat Linea 1.3 Mjet 90 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Fiat Linea 1.3 Mjet 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Linea 1.3 Mjet 90 hp ECU
Fiat Linea (2007) 1.3 Mjet 90 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 90 to 105 hp (+15 hp, +17%) and torque from 200 to 250 Nm (+50 Nm). This engine ships with different ECU variants: Marelli MJD6, Marelli MJD8F3. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. Diesel engines built in 2007 — the era of classic Common Rail without strong encryption.
The Fiat community in Italy and Eastern Europe generates a large volume of chip tuning on compacts. MultiJet is Fiat's proprietary technology for its Common Rail diesel engines.
Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. On naturally aspirated Fiat engines the main effect is sharper throttle response. Low-output Fiat engines are city units, and Stage 1 is safe on them.
Frequently asked questions
How many horsepower does the Fiat Linea 1.3 Mjet 90 hp reach after a remap?
Stage 1 for the Fiat Linea 1.3 Mjet 90 hp adds +15 hp — power increases from 90 to 105 hp (+17%). Torque rises from 200 to 250 Nm (+50 Nm).
What does a Stage 1 remap of the Fiat Linea 1.3 Mjet 90 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Linea with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat Linea?
Yes, Stage 1 on the low-output Fiat Linea 1.3 Mjet 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Fiat Linea 1.3 Mjet 90 hp?
Stage 2 for the Fiat Linea 1.3 Mjet 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Fiat Linea 1.3 Mjet 90 hp built with?
The Fiat Linea 1.3 Mjet 90 hp comes with 2 ECU variants: Marelli MJD6, Marelli MJD8F3. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Fiat Linea remain valid after Stage 1?
After remapping the Fiat Linea, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Linea?
Reading and writing via OBD takes 25-30 minutes on the Fiat Linea. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Linea?
Before Stage 1 the original of the Fiat Linea 1.3 Mjet 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Linea 1.3 Mjet 90 hp cost?
The remap price for the Fiat Linea 1.3 Mjet 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.