Fiat Grande Punto 1.3 Mjet 90 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Fiat Grande Punto 1.3 Mjet 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Grande Punto 1.3 Mjet 90 hp ECU
Fiat Grande Punto (2005) 1.3 Mjet 90 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 90 to 105 hp (+15 hp, +17%) and torque from 200 to 250 Nm (+50 Nm). This engine ships with different ECU variants: Marelli MJD6, Marelli MJD8F3. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
MultiAir is Fiat's own valve-control technology. Low-output Fiat diesels are city units, and Stage 1 is safe on them.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Low-output Fiat engines are city units, and Stage 1 is safe on them. On naturally aspirated Fiat engines the main effect is sharper throttle response.
Frequently asked questions
What is the Stage 1 effect on the Fiat Grande Punto 1.3 Mjet 90 hp?
After Stage 1 the power of the Fiat Grande Punto 1.3 Mjet 90 hp rises from 90 to 105 hp, a gain of 15 hp (+17%). Torque rises from 200 to 250 Nm (+50 Nm).
How does Stage 1 differ from stock on the Fiat Grande Punto?
Stage 1 chip tuning of the Fiat Grande Punto is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +15 hp with no hardware changes.
What does chip tuning give on the low-output Fiat Grande Punto 1.3 Mjet 90 hp?
Stage 1 on the base Fiat Grande Punto is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Fiat Grande Punto?
Stage 2 on the Fiat Grande Punto 1.3 Mjet 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Fiat Grande Punto 1.3 Mjet 90 hp?
The Fiat Grande Punto 1.3 Mjet 90 hp was fitted with different ECUs depending on the year and trim: Marelli MJD6, Marelli MJD8F3. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Fiat Grande Punto warranty after chip tuning?
The factory warranty of the Fiat Grande Punto does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Fiat Grande Punto take?
On the Fiat Grande Punto 1.3 Mjet 90 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Fiat Grande Punto?
Yes, the original ECU firmware of the Fiat Grande Punto 1.3 Mjet 90 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Fiat Grande Punto?
Stage 1 for the Fiat Grande Punto 1.3 Mjet 90 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.