Fiat Grande Punto 1.3 Mjet 70 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Fiat Grande Punto 1.3 Mjet 70 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Grande Punto 1.3 Mjet 70 hp ECU
Fiat Grande Punto (2005) 1.3 Mjet 70 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 70 to 95 hp (+25 hp, +36%) and torque from 190 to 240 Nm (+50 Nm). ECU — Marelli MJD6. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2005 — the era of classic Common Rail without strong encryption.
Fiat sits alongside brands such as Abarth, Lancia and Alfa Romeo (via Stellantis). Fiat's diesel range is built mainly around MultiJet (Common Rail) technology.
Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. On naturally aspirated Fiat engines the main effect is sharper throttle response. Low-output Fiat engines are city units, and Stage 1 is safe on them.
Frequently asked questions
How much horsepower does Stage 1 add for the Fiat Grande Punto 1.3 Mjet 70 hp?
Stage 1 chip tuning on the Fiat Grande Punto 1.3 Mjet 70 hp boosts engine output by 25 hp: from 70 to 95 hp. Torque rises from 190 to 240 Nm (+50 Nm).
What changes in the Fiat Grande Punto ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Grande Punto with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat Grande Punto?
Yes, Stage 1 on the low-output Fiat Grande Punto 1.3 Mjet 70 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Fiat Grande Punto 1.3 Mjet 70 hp?
Stage 2 for the Fiat Grande Punto 1.3 Mjet 70 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Fiat Grande Punto 1.3 Mjet 70 hp use?
The Fiat Grande Punto 1.3 Mjet 70 hp is fitted with the Marelli MJD6 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Grande Punto remain valid after Stage 1?
After remapping the Fiat Grande Punto, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Grande Punto?
Reading and writing via OBD takes 25-30 minutes on the Fiat Grande Punto. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Grande Punto?
Before Stage 1 the original of the Fiat Grande Punto 1.3 Mjet 70 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Grande Punto 1.3 Mjet 70 hp cost?
The remap price for the Fiat Grande Punto 1.3 Mjet 70 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.