Fiat Freemont 2.0 JTDm 140 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Fiat Freemont 2.0 JTDm 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Freemont 2.0 JTDm 140 hp ECU
Fiat Freemont (2011) 2.0 JTDm 140 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 140 to 170 hp (+30 hp, +21%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC17C49, Bosch EDC17C79. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
Fiat is one of the founders of Stellantis, formed by the merger of FCA and PSA in 2021. Fiat-Iveco engines are widely used in the Stellantis commercial segment.
Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. On Fiat diesels, Stage 1 delivers a noticeable torque gain. The Fiat community in Southern Europe has a large pool of ready-made Stage files. Mid-range Fiat engines are a high-volume chip tuning subject.
Frequently asked questions
What is the Stage 1 effect on the Fiat Freemont 2.0 JTDm 140 hp?
Stage 1 chip tuning on the Fiat Freemont 2.0 JTDm 140 hp boosts engine output by 30 hp: from 140 to 170 hp. Torque rises from 350 to 420 Nm (+70 Nm).
What changes in the Fiat Freemont ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Freemont with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Freemont 2.0 JTDm 140 hp?
A remap of the Fiat Freemont 2.0 JTDm 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Freemont 2.0 JTDm 140 hp?
Stage 2 for the Fiat Freemont 2.0 JTDm 140 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Fiat Freemont 2.0 JTDm 140 hp built with?
The Fiat Freemont 2.0 JTDm 140 hp comes with 2 ECU variants: Bosch EDC17C49, Bosch EDC17C79. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Fiat Freemont remain valid after Stage 1?
After remapping the Fiat Freemont, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Freemont?
Reading and writing via OBD takes 25-30 minutes on the Fiat Freemont. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Freemont?
Before Stage 1 the original of the Fiat Freemont 2.0 JTDm 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Freemont 2.0 JTDm 140 hp cost?
The remap price for the Fiat Freemont 2.0 JTDm 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.