Fiat Fiorino 1.4 16v 78 hp — Stage 1 file (+7 hp)
hp
Stage 1 file for Fiat Fiorino 1.4 16v 78 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Fiorino 1.4 16v 78 hp ECU
Fiat Fiorino (2007) 1.4 16v 78 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 78 to 85 hp (+7 hp, +9%) and torque from 120 to 130 Nm (+10 Nm). This engine ships with different ECU variants: Marelli 9GF, Bosch ME7.9.10. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
The Fiat community in Italy and Eastern Europe generates a large volume of chip tuning on compacts. TwinAir is Fiat's signature designation for its two-cylinder turbo engines in the micro segment. MultiAir is Fiat's intake-valve control system. Fiat shares some ECUs and algorithms with Alfa Romeo and Lancia.
Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. On naturally aspirated Fiat engines the main effect is sharper throttle response. Low-output Fiat engines are city units, and Stage 1 is safe on them.
Frequently asked questions
What power gain do you get after chip tuning the Fiat Fiorino 1.4 16v 78 hp?
Stage 1 for the Fiat Fiorino 1.4 16v 78 hp adds +7 hp — power increases from 78 to 85 hp (+9%). Torque rises from 120 to 130 Nm (+10 Nm).
What does a Stage 1 remap of the Fiat Fiorino 1.4 16v 78 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Fiorino with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +7 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat Fiorino?
Yes, Stage 1 on the low-output Fiat Fiorino 1.4 16v 78 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Fiat Fiorino 1.4 16v 78 hp?
Stage 2 for the Fiat Fiorino 1.4 16v 78 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Fiat Fiorino 1.4 16v 78 hp built with?
The Fiat Fiorino 1.4 16v 78 hp comes with 2 ECU variants: Marelli 9GF, Bosch ME7.9.10. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Fiat Fiorino remain valid after Stage 1?
After remapping the Fiat Fiorino, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Fiorino?
Reading and writing via OBD takes 25-30 minutes on the Fiat Fiorino. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Fiorino?
Before Stage 1 the original of the Fiat Fiorino 1.4 16v 78 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Fiorino 1.4 16v 78 hp cost?
The remap price for the Fiat Fiorino 1.4 16v 78 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.