Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp ECU
Fiat Ducato (2016) 2.3 Multijet2 (Euro6) 130 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 130 to 160 hp (+30 hp, +23%) and torque from 320 to 380 Nm (+60 Nm). ECU — Marelli MJD9DF. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Fiat has historically specialised in compact and city cars. The factory calibration on Fiat diesels is conservative, leaving headroom for Stage 1.
On pre-2017 Fiat models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp?
The Stage 1 gain for the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp is 30 hp (+23%) over the stock 130 hp, for a total of 160 hp. Torque rises from 320 to 380 Nm (+60 Nm).
What is Stage 1 chip tuning for the Fiat Ducato?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Ducato with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp?
A remap of the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp?
Stage 2 on the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp use?
The Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp is fitted with the Marelli MJD9DF ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Ducato remain valid after Stage 1?
After remapping the Fiat Ducato, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Ducato?
Reading and writing via OBD takes 25-30 minutes on the Fiat Ducato. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Ducato?
Before Stage 1 the original of the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp cost?
The remap price for the Fiat Ducato 2.3 Multijet2 (Euro6) 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.