Fiat Ducato 2.2 JTD 120 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Fiat Ducato 2.2 JTD 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Ducato 2.2 JTD 120 hp ECU
Fiat Ducato (2002) 2.2 JTD 120 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 120 to 150 hp (+30 hp, +25%) and torque from 320 to 380 Nm (+60 Nm). ECU — Visteon DCU-102. Flashing method: OBD or Bench depending on the unit's protection. The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Fiat range covers compacts, saloons, crossovers and commercial models. On older Fiat diesels, Stage 1 goes in via OBD with no complications.
On Fiat diesels, Stage 1 delivers a noticeable torque gain. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Fiat Ducato 2.2 JTD 120 hp reach after a remap?
The Stage 1 gain for the Fiat Ducato 2.2 JTD 120 hp is 30 hp (+25%) over the stock 120 hp, for a total of 150 hp. Torque rises from 320 to 380 Nm (+60 Nm).
What is Stage 1 chip tuning for the Fiat Ducato?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Ducato with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Ducato 2.2 JTD 120 hp?
A remap of the Fiat Ducato 2.2 JTD 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Ducato 2.2 JTD 120 hp?
Stage 2 on the Fiat Ducato 2.2 JTD 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat Ducato 2.2 JTD 120 hp use?
The Fiat Ducato 2.2 JTD 120 hp is fitted with the Visteon DCU-102 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Ducato remain valid after Stage 1?
After remapping the Fiat Ducato, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Ducato?
Reading and writing via OBD takes 25-30 minutes on the Fiat Ducato. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Ducato?
Before Stage 1 the original of the Fiat Ducato 2.2 JTD 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Ducato 2.2 JTD 120 hp cost?
The remap price for the Fiat Ducato 2.2 JTD 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.