Fiat Bravo 1.6 JTDm 105 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Fiat Bravo 1.6 JTDm 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Bravo 1.6 JTDm 105 hp ECU
Fiat Bravo (2007) 1.6 JTDm 105 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 105 to 130 hp (+25 hp, +24%) and torque from 320 to 360 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC16C08, Bosch EDC16C39 (CAN), Bosch EDC17C49, Bosch EDC17C69. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Fiat has historically specialised in compact and city cars. The factory calibration on Fiat diesels is conservative, leaving headroom for Stage 1.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. On Fiat diesels, Stage 1 delivers a noticeable torque gain. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Fiat Bravo 1.6 JTDm 105 hp reach after a remap?
The Stage 1 gain for the Fiat Bravo 1.6 JTDm 105 hp is 25 hp (+24%) over the stock 105 hp, for a total of 130 hp. Torque rises from 320 to 360 Nm (+40 Nm).
What is Stage 1 chip tuning for the Fiat Bravo?
Stage 1 chip tuning of the Fiat Bravo is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Fiat Bravo 1.6 JTDm 105 hp?
Yes, Stage 1 for the Fiat Bravo 1.6 JTDm 105 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Fiat Bravo?
Stage 2 on the Fiat Bravo 1.6 JTDm 105 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Fiat Bravo 1.6 JTDm 105 hp?
The Fiat Bravo 1.6 JTDm 105 hp was fitted with different ECUs depending on the year and trim: Bosch EDC16C08, Bosch EDC16C39 (CAN), Bosch EDC17C49, Bosch EDC17C69. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Fiat Bravo warranty after chip tuning?
The factory warranty of the Fiat Bravo does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Fiat Bravo take?
On the Fiat Bravo 1.6 JTDm 105 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Fiat Bravo?
Yes, the original ECU firmware of the Fiat Bravo 1.6 JTDm 105 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Fiat Bravo?
Stage 1 for the Fiat Bravo 1.6 JTDm 105 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.