Fiat 500 1.2 8v 69 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Fiat 500 1.2 8v 69 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat 500 1.2 8v 69 hp ECU
Fiat 500 (2015) 1.2 8v 69 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 69 to 75 hp (+6 hp, +9%) and torque from 102 to 112 Nm (+10 Nm). ECU — Marelli 9GF. Flashing method: OBD or Bench depending on the unit's protection. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
MultiAir is Fiat's own valve-control technology. Low-output Fiat petrol engines are naturally aspirated city-segment units; the gain is modest. Mid-generation petrol models use standard OBD flash. Fiat's petrol range consists of compact turbo and naturally aspirated engines for the urban segment.
On pre-2017 Fiat models, Stage 1 is done via OBD without bench. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Low-output Fiat engines are city units, and Stage 1 is safe on them. On naturally aspirated Fiat engines the main effect is sharper throttle response.
Frequently asked questions
What power gain do you get after chip tuning the Fiat 500 1.2 8v 69 hp?
After Stage 1 the power of the Fiat 500 1.2 8v 69 hp rises from 69 to 75 hp, a gain of 6 hp (+9%). Torque rises from 102 to 112 Nm (+10 Nm).
How does Stage 1 differ from stock on the Fiat 500?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat 500 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +6 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat 500?
Stage 1 on the base Fiat 500 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Fiat 500 1.2 8v 69 hp?
Stage 2 on the Fiat 500 1.2 8v 69 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat 500 1.2 8v 69 hp use?
The Fiat 500 1.2 8v 69 hp is fitted with the Marelli 9GF ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat 500 remain valid after Stage 1?
After remapping the Fiat 500, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat 500?
Reading and writing via OBD takes 25-30 minutes on the Fiat 500. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat 500?
Before Stage 1 the original of the Fiat 500 1.2 8v 69 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat 500 1.2 8v 69 hp cost?
The remap price for the Fiat 500 1.2 8v 69 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.