Fiat 500 1.4 16v (fiat) 100 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Fiat 500 1.4 16v (fiat) 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat 500 1.4 16v (fiat) 100 hp ECU
Fiat 500 (2007) 1.4 16v (fiat) 100 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 100 to 105 hp (+5 hp, +5%) and torque from 131 to 141 Nm (+10 Nm). ECU — Bosch ME7.9.10. Flashing method: OBD or Bench depending on the unit's protection. The 2007 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
The Fiat range covers compacts, saloons, crossovers and commercial models. On mid-range Fiat turbo petrol engines, Stage 1 delivers a noticeable gain. On older-generation petrol Fiat models, Stage 1 is done via OBD without bench. Fiat's petrol range consists of compact turbo and naturally aspirated engines for the urban segment.
On mid-range Fiat petrol engines, Stage 1 delivers a noticeable gain. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Fiat 500 1.4 16v (fiat) 100 hp?
The Stage 1 gain for the Fiat 500 1.4 16v (fiat) 100 hp is 5 hp (+5%) over the stock 100 hp, for a total of 105 hp. Torque rises from 131 to 141 Nm (+10 Nm).
What is Stage 1 chip tuning for the Fiat 500?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat 500 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat 500 1.4 16v (fiat) 100 hp?
A remap of the Fiat 500 1.4 16v (fiat) 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat 500 1.4 16v (fiat) 100 hp?
Stage 2 on the Fiat 500 1.4 16v (fiat) 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat 500 1.4 16v (fiat) 100 hp use?
The Fiat 500 1.4 16v (fiat) 100 hp is fitted with the Bosch ME7.9.10 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat 500 remain valid after Stage 1?
After remapping the Fiat 500, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat 500?
Reading and writing via OBD takes 25-30 minutes on the Fiat 500. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat 500?
Before Stage 1 the original of the Fiat 500 1.4 16v (fiat) 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat 500 1.4 16v (fiat) 100 hp cost?
The remap price for the Fiat 500 1.4 16v (fiat) 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.