Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm — Stage 1 file (+45 hp)
hp
Stage 1 file for Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm ECU
Fendt 900 serie (I) 939 SCR 7.8 390hp (287kW) 1547Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 390 to 435 hp (+45 hp, +12%) and torque from 1547 to 1746 Nm (+199 Nm).
Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Топ агро-дизели — мощностной потолок сегмента. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ Fendt — мощностной потолок агросегмента.
Frequently asked questions
What is the Stage 1 effect on the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm?
The Stage 1 gain for the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm is 45 hp (+12%) over the stock 390 hp, for a total of 435 hp. Torque rises from 1547 to 1746 Nm (+199 Nm).
What is Stage 1 chip tuning for the Fendt 900 serie?
Stage 1 chip tuning of the Fendt 900 serie is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +45 hp with no hardware changes.
What is the Stage 1 potential of the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm?
Stage 1 for the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Fendt 900 serie?
Stage 2 on the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Fendt 900 serie warranty after chip tuning?
The factory warranty of the Fendt 900 serie does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Fendt 900 serie take?
On the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Fendt 900 serie?
Yes, the original ECU firmware of the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Fendt 900 serie?
Stage 1 for the Fendt 900 serie 939 SCR 7.8 390hp (287kW) 1547Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.