Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm — Stage 1 file (+76 hp)
hp
Stage 1 file for Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm ECU
Fendt 900 serie (I) 933 Vario 324hp (238kW) 1310Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 324 to 400 hp (+76 hp, +23%) and torque from 1310 to 1495 Nm (+185 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Fendt — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm?
Stage 1 chip tuning on the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm boosts engine output by 76 hp: from 324 to 400 hp. Torque rises from 1310 to 1495 Nm (+185 Nm).
What changes in the Fendt 900 serie ECU after Stage 1?
Stage 1 on the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +76 hp with no hardware changes.
What does Stage 1 give on the powerful Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm?
Stage 1 on the powerful Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm?
Stage 2 for the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Fendt 900 serie?
Stage 1 on the Fendt 900 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm done?
The full remap cycle for the Fendt 900 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 900 serie?
The original Fendt 900 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm?
The cost of Stage 1 for the Fendt 900 serie 933 Vario 324hp (238kW) 1310Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.