Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm — Stage 1 file (+58 hp)
hp
Stage 1 file for Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm ECU
Fendt 900 serie (I) 933 SCR 7.8 300hp (221kW) 1326Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 300 to 358 hp (+58 hp, +19%) and torque from 1326 to 1596 Nm (+270 Nm).
Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Fendt — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm reach after a remap?
After Stage 1 the power of the Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm rises from 300 to 358 hp, a gain of 58 hp (+19%). Torque rises from 1326 to 1596 Nm (+270 Nm).
How does Stage 1 differ from stock on the Fendt 900 serie?
Stage 1 is a software optimization of the factory ECU firmware of the Fendt 900 serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +58 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Fendt 900 serie?
The high-output Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm?
Stage 2 on the Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Fendt 900 serie remain valid after Stage 1?
After remapping the Fendt 900 serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fendt 900 serie?
Reading and writing via OBD takes 25-30 minutes on the Fendt 900 serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fendt 900 serie?
Before Stage 1 the original of the Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm cost?
The remap price for the Fendt 900 serie 933 SCR 7.8 300hp (221kW) 1326Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.