Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm — Stage 1 file (+67 hp)
hp
Stage 1 file for Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm ECU
Fendt 900 serie (I) 930 Vario 7.1 299hp (220kW) 1218Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 299 to 366 hp (+67 hp, +22%) and torque from 1218 to 1445 Nm (+227 Nm).
Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Fendt — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm?
The Stage 1 gain for the Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm is 67 hp (+22%) over the stock 299 hp, for a total of 366 hp. Torque rises from 1218 to 1445 Nm (+227 Nm).
What is Stage 1 chip tuning for the Fendt 900 serie?
Stage 1 is a software optimization of the factory ECU firmware of the Fendt 900 serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +67 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Fendt 900 serie?
The high-output Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm?
Stage 2 on the Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Fendt 900 serie remain valid after Stage 1?
After remapping the Fendt 900 serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fendt 900 serie?
Reading and writing via OBD takes 25-30 minutes on the Fendt 900 serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fendt 900 serie?
Before Stage 1 the original of the Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm cost?
The remap price for the Fendt 900 serie 930 Vario 7.1 299hp (220kW) 1218Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.