Fendt 900 serie 920 Vario 210hp (154kW) 960Nm — Stage 1 file (+35 hp)
hp
Stage 1 file for Fendt 900 serie 920 Vario 210hp (154kW) 960Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 900 serie 920 Vario 210hp (154kW) 960Nm ECU
Fendt 900 serie (I) 920 Vario 210hp (154kW) 960Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 210 to 245 hp (+35 hp, +17%) and torque from 960 to 1128 Nm (+168 Nm).
Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Высокомощные Fendt — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Fendt 900 serie 920 Vario 210hp (154kW) 960Nm?
Stage 1 chip tuning on the Fendt 900 serie 920 Vario 210hp (154kW) 960Nm boosts engine output by 35 hp: from 210 to 245 hp. Torque rises from 960 to 1128 Nm (+168 Nm).
What changes in the Fendt 900 serie ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Fendt 900 serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Fendt 900 serie?
Stage 1 on the powerful Fendt 900 serie 920 Vario 210hp (154kW) 960Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Fendt 900 serie 920 Vario 210hp (154kW) 960Nm?
Stage 2 for the Fendt 900 serie 920 Vario 210hp (154kW) 960Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Fendt 900 serie remain valid after Stage 1?
After remapping the Fendt 900 serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fendt 900 serie?
Reading and writing via OBD takes 25-30 minutes on the Fendt 900 serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fendt 900 serie?
Before Stage 1 the original of the Fendt 900 serie 920 Vario 210hp (154kW) 960Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fendt 900 serie 920 Vario 210hp (154kW) 960Nm cost?
The remap price for the Fendt 900 serie 920 Vario 210hp (154kW) 960Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.