Fendt 900 serie 916 Vario 180hp (132kW) 825Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Fendt 900 serie 916 Vario 180hp (132kW) 825Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 900 serie 916 Vario 180hp (132kW) 825Nm ECU
Fendt 900 serie (I) 916 Vario 180hp (132kW) 825Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 180 to 210 hp (+30 hp, +17%) and torque from 825 to 985 Nm (+160 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Fendt среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm?
The Stage 1 gain for the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm is 30 hp (+17%) over the stock 180 hp, for a total of 210 hp. Torque rises from 825 to 985 Nm (+160 Nm).
What is Stage 1 chip tuning for the Fendt 900 serie?
Stage 1 on the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 916 Vario 180hp (132kW) 825Nm?
Stage 1 on the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm?
Stage 2 on the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Fendt 900 serie?
Stage 1 on the Fendt 900 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm done?
The full remap cycle for the Fendt 900 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 900 serie?
The original Fendt 900 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm?
The cost of Stage 1 for the Fendt 900 serie 916 Vario 180hp (132kW) 825Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.