Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm — Stage 1 file (+38 hp)
hp
Stage 1 file for Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm ECU
Fendt 800 serie (I) 824 Vario 6.1 SCR 240hp (176kW) 1040Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 240 to 278 hp (+38 hp, +16%) and torque from 1040 to 1136 Nm (+96 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Fendt — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm?
The Stage 1 gain for the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm is 38 hp (+16%) over the stock 240 hp, for a total of 278 hp. Torque rises from 1040 to 1136 Nm (+96 Nm).
What is Stage 1 chip tuning for the Fendt 800 serie?
Stage 1 on the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +38 hp with no hardware changes.
What does Stage 1 give on the powerful Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm?
The high-output Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm?
Stage 2 on the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Fendt 800 serie?
Stage 1 on the Fendt 800 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm done?
The full remap cycle for the Fendt 800 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 800 serie?
The original Fendt 800 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm?
The cost of Stage 1 for the Fendt 800 serie 824 Vario 6.1 SCR 240hp (176kW) 1040Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.