Fendt 800 serie 815 Vario 150hp (110kW) 730Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Fendt 800 serie 815 Vario 150hp (110kW) 730Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 800 serie 815 Vario 150hp (110kW) 730Nm ECU
Fendt 800 serie (I) 815 Vario 150hp (110kW) 730Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 730 to 805 Nm (+75 Nm).
Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Fendt среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm increase after Stage 1?
After Stage 1 the power of the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm rises from 150 to 180 hp, a gain of 30 hp (+20%). Torque rises from 730 to 805 Nm (+75 Nm).
How does Stage 1 differ from stock on the Fendt 800 serie?
Stage 1 is a software optimization of the factory ECU firmware of the Fendt 800 serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm?
A remap of the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm?
Stage 2 on the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Fendt 800 serie remain valid after Stage 1?
After remapping the Fendt 800 serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fendt 800 serie?
Reading and writing via OBD takes 25-30 minutes on the Fendt 800 serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fendt 800 serie?
Before Stage 1 the original of the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm cost?
The remap price for the Fendt 800 serie 815 Vario 150hp (110kW) 730Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.