Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm — Stage 1 file (+-61 hp)
hp
Stage 1 file for Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm ECU
Fendt 700 serie (I) 720 Vario 6.1 SCR 201hp (148kW) 897Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 201 to 140 hp (+-61 hp, +-30%) and torque from 897 to 997 Nm (+100 Nm).
Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Fendt — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm reach after a remap?
The Stage 1 gain for the Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm is -61 hp (+-30%) over the stock 201 hp, for a total of 140 hp. Torque rises from 897 to 997 Nm (+100 Nm).
What is Stage 1 chip tuning for the Fendt 700 serie?
Stage 1 chip tuning of the Fendt 700 serie is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +-61 hp with no hardware changes.
Is Stage 1 safe on the high-output Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm?
The high-output Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Fendt 700 serie?
Stage 2 on the Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Fendt 700 serie warranty after chip tuning?
The factory warranty of the Fendt 700 serie does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Fendt 700 serie take?
On the Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Fendt 700 serie?
Yes, the original ECU firmware of the Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Fendt 700 serie?
Stage 1 for the Fendt 700 serie 720 Vario 6.1 SCR 201hp (148kW) 897Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.