Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm ECU
Fendt 700 serie (I) 716 Vario 5.7 160hp (118kW) 760Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 160 to 188 hp (+28 hp, +18%) and torque from 760 to 836 Nm (+76 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Fendt среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm?
After Stage 1 the power of the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm rises from 160 to 188 hp, a gain of 28 hp (+18%). Torque rises from 760 to 836 Nm (+76 Nm).
How does Stage 1 differ from stock on the Fendt 700 serie?
Stage 1 on the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
Is a Stage 1 remap safe for the 716 Vario 5.7 160hp (118kW) 760Nm?
Stage 1 on the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm?
Stage 2 on the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Fendt 700 serie?
Stage 1 on the Fendt 700 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm done?
The full remap cycle for the Fendt 700 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 700 serie?
The original Fendt 700 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm?
The cost of Stage 1 for the Fendt 700 serie 716 Vario 5.7 160hp (118kW) 760Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.