Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm — Stage 1 file (+31 hp)
hp
Stage 1 file for Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm ECU
Fendt 700 serie (I) 714 Vario 6.1 167hp (123kW) 640Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 167 to 198 hp (+31 hp, +19%) and torque from 640 to 724 Nm (+84 Nm).
Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Fendt среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm reach after a remap?
After Stage 1 the power of the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm rises from 167 to 198 hp, a gain of 31 hp (+19%). Torque rises from 640 to 724 Nm (+84 Nm).
How does Stage 1 differ from stock on the Fendt 700 serie?
Stage 1 is a software optimization of the factory ECU firmware of the Fendt 700 serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.
What is the risk of Stage 1 on the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm?
A remap of the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm?
Stage 2 on the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Fendt 700 serie remain valid after Stage 1?
After remapping the Fendt 700 serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fendt 700 serie?
Reading and writing via OBD takes 25-30 minutes on the Fendt 700 serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fendt 700 serie?
Before Stage 1 the original of the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm cost?
The remap price for the Fendt 700 serie 714 Vario 6.1 167hp (123kW) 640Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.