Fendt 700 serie 711 Vario 116hp (85kW) 550Nm — Stage 1 file (+24 hp)
hp
Stage 1 file for Fendt 700 serie 711 Vario 116hp (85kW) 550Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 700 serie 711 Vario 116hp (85kW) 550Nm ECU
Fendt 700 serie (I) 711 Vario 116hp (85kW) 550Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 116 to 140 hp (+24 hp, +21%) and torque from 550 to 635 Nm (+85 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Fendt среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm?
Stage 1 for the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm adds +24 hp — power increases from 116 to 140 hp (+21%). Torque rises from 550 to 635 Nm (+85 Nm).
What does a Stage 1 remap of the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm include?
Stage 1 on the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +24 hp with no hardware changes.
Is a Stage 1 remap safe for the 711 Vario 116hp (85kW) 550Nm?
Stage 1 on the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm?
Stage 2 for the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Fendt 700 serie?
Stage 1 on the Fendt 700 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm done?
The full remap cycle for the Fendt 700 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 700 serie?
The original Fendt 700 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm?
The cost of Stage 1 for the Fendt 700 serie 711 Vario 116hp (85kW) 550Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.