Fendt 400 serie 415 Vario 154hp (113kW) 657Nm — Stage 1 file (+32 hp)
hp
Stage 1 file for Fendt 400 serie 415 Vario 154hp (113kW) 657Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 400 serie 415 Vario 154hp (113kW) 657Nm ECU
Fendt 400 serie (I) 415 Vario 154hp (113kW) 657Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 154 to 186 hp (+32 hp, +21%) and torque from 657 to 796 Nm (+139 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Fendt среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm reach after a remap?
The Stage 1 gain for the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm is 32 hp (+21%) over the stock 154 hp, for a total of 186 hp. Torque rises from 657 to 796 Nm (+139 Nm).
What is Stage 1 chip tuning for the Fendt 400 serie?
Stage 1 on the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +32 hp with no hardware changes.
Is a Stage 1 remap safe for the 415 Vario 154hp (113kW) 657Nm?
Stage 1 on the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm?
Stage 2 on the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Fendt 400 serie?
Stage 1 on the Fendt 400 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm done?
The full remap cycle for the Fendt 400 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 400 serie?
The original Fendt 400 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm?
The cost of Stage 1 for the Fendt 400 serie 415 Vario 154hp (113kW) 657Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.