Fendt 300 serie 311 Vario 114hp (84kW) 485Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for Fendt 300 serie 311 Vario 114hp (84kW) 485Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 300 serie 311 Vario 114hp (84kW) 485Nm ECU
Fendt 300 serie (I) 311 Vario 114hp (84kW) 485Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 114 to 142 hp (+28 hp, +25%) and torque from 485 to 576 Nm (+91 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Fendt среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm?
Stage 1 chip tuning on the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm boosts engine output by 28 hp: from 114 to 142 hp. Torque rises from 485 to 576 Nm (+91 Nm).
What changes in the Fendt 300 serie ECU after Stage 1?
Stage 1 on the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
Is a Stage 1 remap safe for the 311 Vario 114hp (84kW) 485Nm?
Stage 1 on the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm?
Stage 2 for the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Fendt 300 serie?
Stage 1 on the Fendt 300 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm done?
The full remap cycle for the Fendt 300 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 300 serie?
The original Fendt 300 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm?
The cost of Stage 1 for the Fendt 300 serie 311 Vario 114hp (84kW) 485Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.