Fendt 300 serie 310 Vario 99hp (73kW) 445Nm — Stage 1 file (+24 hp)
hp
Stage 1 file for Fendt 300 serie 310 Vario 99hp (73kW) 445Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 300 serie 310 Vario 99hp (73kW) 445Nm ECU
Fendt 300 serie (I) 310 Vario 99hp (73kW) 445Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 99 to 123 hp (+24 hp, +24%) and torque from 445 to 532 Nm (+87 Nm).
Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Fendt sits in the premium agricultural segment with a strong focus on technology. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Fendt — компактная техника; Stage 1 безопасный.
Frequently asked questions
What power gain do you get after chip tuning the Fendt 300 serie 310 Vario 99hp (73kW) 445Nm?
The Stage 1 gain for the Fendt 300 serie 310 Vario 99hp (73kW) 445Nm is 24 hp (+24%) over the stock 99 hp, for a total of 123 hp. Torque rises from 445 to 532 Nm (+87 Nm).
What is Stage 1 chip tuning for the Fendt 300 serie?
Stage 1 is a software optimization of the factory ECU firmware of the Fendt 300 serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
Is Stage 1 worth doing on the base Fendt 300 serie?
Stage 1 on the base Fendt 300 serie is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Fendt 300 serie 310 Vario 99hp (73kW) 445Nm?
Stage 2 on the Fendt 300 serie 310 Vario 99hp (73kW) 445Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Fendt 300 serie remain valid after Stage 1?
After remapping the Fendt 300 serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fendt 300 serie?
Reading and writing via OBD takes 25-30 minutes on the Fendt 300 serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fendt 300 serie?
Before Stage 1 the original of the Fendt 300 serie 310 Vario 99hp (73kW) 445Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fendt 300 serie 310 Vario 99hp (73kW) 445Nm cost?
The remap price for the Fendt 300 serie 310 Vario 99hp (73kW) 445Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.