Fendt 200 serie 208 Vario 80hp (59kW) 337Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for Fendt 200 serie 208 Vario 80hp (59kW) 337Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 200 serie 208 Vario 80hp (59kW) 337Nm ECU
Fendt 200 serie (I) 208 Vario 80hp (59kW) 337Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 80 to 108 hp (+28 hp, +35%) and torque from 337 to 477 Nm (+140 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Fendt — компактная техника; Stage 1 безопасный.
Frequently asked questions
How many horsepower does the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm reach after a remap?
The Stage 1 gain for the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm is 28 hp (+35%) over the stock 80 hp, for a total of 108 hp. Torque rises from 337 to 477 Nm (+140 Nm).
What is Stage 1 chip tuning for the Fendt 200 serie?
Stage 1 on the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
Is Stage 1 safe for the low-output Fendt 200 serie 208 Vario 80hp (59kW) 337Nm?
Stage 1 on the base Fendt 200 serie is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm?
Stage 2 on the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Fendt 200 serie?
Stage 1 on the Fendt 200 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm done?
The full remap cycle for the Fendt 200 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 200 serie?
The original Fendt 200 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm?
The cost of Stage 1 for the Fendt 200 serie 208 Vario 80hp (59kW) 337Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.