Fendt 200 serie 207 Vario 70hp (51kW) 295Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for Fendt 200 serie 207 Vario 70hp (51kW) 295Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Fendt 200 serie 207 Vario 70hp (51kW) 295Nm ECU
Fendt 200 serie (I) 207 Vario 70hp (51kW) 295Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Германия, 1930). Stage 1 chip tuning raises power from 70 to 98 hp (+28 hp, +40%) and torque from 295 to 378 Nm (+83 Nm).
Fendt sits in the premium agricultural segment with a strong focus on technology. Fendt is a German premium tractor manufacturer, founded in 1930. Fendt is part of AGCO Corporation. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Fendt — компактная техника; Stage 1 безопасный.
Frequently asked questions
What power gain do you get after chip tuning the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm?
Stage 1 chip tuning on the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm boosts engine output by 28 hp: from 70 to 98 hp. Torque rises from 295 to 378 Nm (+83 Nm).
What changes in the Fendt 200 serie ECU after Stage 1?
Stage 1 on the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
Is Stage 1 safe for the low-output Fendt 200 serie 207 Vario 70hp (51kW) 295Nm?
Yes, Stage 1 on the low-output Fendt 200 serie 207 Vario 70hp (51kW) 295Nm delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm?
Stage 2 for the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Fendt 200 serie?
Stage 1 on the Fendt 200 serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm done?
The full remap cycle for the Fendt 200 serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fendt 200 serie?
The original Fendt 200 serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm?
The cost of Stage 1 for the Fendt 200 serie 207 Vario 70hp (51kW) 295Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.