DS 4 1.6 BlueHDI 115 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for DS 4 1.6 BlueHDI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for DS 4 1.6 BlueHDI 115 hp ECU
DS 4 (2016) 1.6 BlueHDI 115 hp — premium diesel engine of the passenger segment of the Stellantis group (Франция, 2014). Stage 1 chip tuning raises power from 115 to 140 hp (+25 hp, +22%) and torque from 300 to 340 Nm (+40 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.
DS is part of the Stellantis group. DS shares platforms and engines with Citroen, Peugeot and Opel within Stellantis. DS Automobiles is a French premium brand, spun off from Citroen in 2014. Mid-generation diesel models use standard OBD read/write.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What power gain do you get after chip tuning the DS 4 1.6 BlueHDI 115 hp?
Stage 1 chip tuning on the DS 4 1.6 BlueHDI 115 hp boosts engine output by 25 hp: from 115 to 140 hp. Torque rises from 300 to 340 Nm (+40 Nm).
What changes in the DS 4 ECU after Stage 1?
Stage 1 on the DS 4 1.6 BlueHDI 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 BlueHDI 115 hp?
Stage 1 on the DS 4 1.6 BlueHDI 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the DS 4 1.6 BlueHDI 115 hp?
Stage 2 for the DS 4 1.6 BlueHDI 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the DS 4 1.6 BlueHDI 115 hp run?
The control unit of the DS 4 1.6 BlueHDI 115 hp is the Bosch EDC17C60. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the DS 4?
Stage 1 on the DS 4 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the DS 4 1.6 BlueHDI 115 hp done?
The full remap cycle for the DS 4 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the DS 4?
The original DS 4 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the DS 4 1.6 BlueHDI 115 hp?
The cost of Stage 1 for the DS 4 1.6 BlueHDI 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.