DS 3 1.6 THP 207 hp — Stage 1 file (+23 hp)
hp
Stage 1 file for DS 3 1.6 THP 207 hp
Target +0 hp. Custom development for your engine.
Chip tuning for DS 3 1.6 THP 207 hp ECU
DS 3 (2009) 1.6 THP 207 hp — premium petrol engine of the passenger segment of the Stellantis group (Франция, 2014). Stage 1 chip tuning raises power from 207 to 230 hp (+23 hp, +11%) and torque from 285 to 340 Nm (+55 Nm). ECU — Bosch MED17.4.2. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
DS is part of the Stellantis group. DS shares platforms and engines with Citroen, Peugeot and Opel within Stellantis. DS Automobiles is a French premium brand, spun off from Citroen in 2014. PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. High-output Citroen petrol engines are rare, as the focus is on the family segment.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. High-output Citroens are rare, as the core segment is low and mid.
Frequently asked questions
What power gain do you get after chip tuning the DS 3 1.6 THP 207 hp?
After Stage 1 the power of the DS 3 1.6 THP 207 hp rises from 207 to 230 hp, a gain of 23 hp (+11%). Torque rises from 285 to 340 Nm (+55 Nm).
How does Stage 1 differ from stock on the DS 3?
Stage 1 on the DS 3 1.6 THP 207 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +23 hp with no hardware changes.
What does Stage 1 give on the powerful DS 3 1.6 THP 207 hp?
The high-output DS 3 1.6 THP 207 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the DS 3 1.6 THP 207 hp?
Stage 2 on the DS 3 1.6 THP 207 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the DS 3 1.6 THP 207 hp run?
The control unit of the DS 3 1.6 THP 207 hp is the Bosch MED17.4.2. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the DS 3?
Stage 1 on the DS 3 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the DS 3 1.6 THP 207 hp done?
The full remap cycle for the DS 3 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the DS 3?
The original DS 3 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the DS 3 1.6 THP 207 hp?
The cost of Stage 1 for the DS 3 1.6 THP 207 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.