DS 3 1.6 THP 200 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for DS 3 1.6 THP 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for DS 3 1.6 THP 200 hp ECU
DS 3 (2009) 1.6 THP 200 hp — premium petrol engine of the passenger segment of the Stellantis group (Франция, 2014). Stage 1 chip tuning raises power from 200 to 230 hp (+30 hp, +15%) and torque from 275 to 340 Nm (+65 Nm). This engine ships with different ECU variants: Bosch MED17.4.2, Bosch MEVD17.4.2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2009 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
DS positions itself as the group's premium arm and a French rival to Audi and BMW. The DS range comprises premium crossovers and saloons. DS is part of the Stellantis group. PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. High-output Citroen petrol engines are rare, as the focus is on the family segment.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. High-output Citroens are rare, as the core segment is low and mid.
Frequently asked questions
How much does the power of the DS 3 1.6 THP 200 hp increase after Stage 1?
The Stage 1 gain for the DS 3 1.6 THP 200 hp is 30 hp (+15%) over the stock 200 hp, for a total of 230 hp. Torque rises from 275 to 340 Nm (+65 Nm).
What is Stage 1 chip tuning for the DS 3?
Stage 1 on the DS 3 1.6 THP 200 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
What does Stage 1 give on the powerful DS 3 1.6 THP 200 hp?
The high-output DS 3 1.6 THP 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the DS 3 1.6 THP 200 hp?
Stage 2 on the DS 3 1.6 THP 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the DS 3 1.6 THP 200 hp have?
The DS 3 1.6 THP 200 hp has 2 ECU variants: Bosch MED17.4.2, Bosch MEVD17.4.2. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the DS 3?
Stage 1 on the DS 3 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the DS 3 1.6 THP 200 hp done?
The full remap cycle for the DS 3 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the DS 3?
The original DS 3 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the DS 3 1.6 THP 200 hp?
The cost of Stage 1 for the DS 3 1.6 THP 200 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.