DS 3 1.6 HDI (2008) 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for DS 3 1.6 HDI (2008) 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for DS 3 1.6 HDI (2008) 90 hp ECU
DS 3 (2009) 1.6 HDI (2008) 90 hp — premium diesel engine of the passenger segment of the Stellantis group (Франция, 2014). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 230 to 275 Nm (+45 Nm). This engine ships with different ECU variants: Bosch EDC16C34, Bosch EDC17C10. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
DS positions itself as the group's premium arm and a French rival to Audi and BMW. The DS range comprises premium crossovers and saloons. DS is part of the Stellantis group. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How much does the power of the DS 3 1.6 HDI (2008) 90 hp increase after Stage 1?
Stage 1 for the DS 3 1.6 HDI (2008) 90 hp adds +25 hp — power increases from 90 to 115 hp (+28%). Torque rises from 230 to 275 Nm (+45 Nm).
What does a Stage 1 remap of the DS 3 1.6 HDI (2008) 90 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the DS 3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base DS 3?
Yes, Stage 1 on the low-output DS 3 1.6 HDI (2008) 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the DS 3 1.6 HDI (2008) 90 hp?
Stage 2 for the DS 3 1.6 HDI (2008) 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the DS 3 1.6 HDI (2008) 90 hp built with?
The DS 3 1.6 HDI (2008) 90 hp comes with 2 ECU variants: Bosch EDC16C34, Bosch EDC17C10. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the DS 3 remain valid after Stage 1?
After remapping the DS 3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the DS 3?
Reading and writing via OBD takes 25-30 minutes on the DS 3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the DS 3?
Before Stage 1 the original of the DS 3 1.6 HDI (2008) 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the DS 3 1.6 HDI (2008) 90 hp cost?
The remap price for the DS 3 1.6 HDI (2008) 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.