DS 3 1.6 BlueHDI 75 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for DS 3 1.6 BlueHDI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for DS 3 1.6 BlueHDI 75 hp ECU
DS 3 (2009) 1.6 BlueHDI 75 hp — premium diesel engine of the passenger segment of the Stellantis group (Франция, 2014). Stage 1 chip tuning raises power from 75 to 110 hp (+35 hp, +47%) and torque from 230 to 300 Nm (+70 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
DS Automobiles is a French premium brand, spun off from Citroen in 2014. DS positions itself as the group's premium arm and a French rival to Audi and BMW. The DS range comprises premium crossovers and saloons. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How much horsepower does Stage 1 add for the DS 3 1.6 BlueHDI 75 hp?
Stage 1 for the DS 3 1.6 BlueHDI 75 hp adds +35 hp — power increases from 75 to 110 hp (+47%). Torque rises from 230 to 300 Nm (+70 Nm).
What does a Stage 1 remap of the DS 3 1.6 BlueHDI 75 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the DS 3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Is Stage 1 worth doing on the base DS 3?
Yes, Stage 1 on the low-output DS 3 1.6 BlueHDI 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the DS 3 1.6 BlueHDI 75 hp?
Stage 2 for the DS 3 1.6 BlueHDI 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the DS 3 1.6 BlueHDI 75 hp use?
The DS 3 1.6 BlueHDI 75 hp is fitted with the Bosch EDC17C60 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the DS 3 remain valid after Stage 1?
After remapping the DS 3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the DS 3?
Reading and writing via OBD takes 25-30 minutes on the DS 3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the DS 3?
Before Stage 1 the original of the DS 3 1.6 BlueHDI 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the DS 3 1.6 BlueHDI 75 hp cost?
The remap price for the DS 3 1.6 BlueHDI 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.