DS 3 1.6 BlueHDI 100 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for DS 3 1.6 BlueHDI 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for DS 3 1.6 BlueHDI 100 hp ECU
DS 3 (2009) 1.6 BlueHDI 100 hp — premium diesel engine of the passenger segment of the Stellantis group (Франция, 2014). Stage 1 chip tuning raises power from 100 to 135 hp (+35 hp, +35%) and torque from 254 to 300 Nm (+46 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
DS is part of the Stellantis group. DS shares platforms and engines with Citroen, Peugeot and Opel within Stellantis. DS Automobiles is a French premium brand, spun off from Citroen in 2014. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
Stage 1 on Citroen diesels delivers a noticeable torque gain. The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the DS 3 1.6 BlueHDI 100 hp?
The Stage 1 gain for the DS 3 1.6 BlueHDI 100 hp is 35 hp (+35%) over the stock 100 hp, for a total of 135 hp. Torque rises from 254 to 300 Nm (+46 Nm).
What is Stage 1 chip tuning for the DS 3?
Stage 1 is a software optimization of the factory ECU firmware of the DS 3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the DS 3 1.6 BlueHDI 100 hp?
A remap of the DS 3 1.6 BlueHDI 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the DS 3 1.6 BlueHDI 100 hp?
Stage 2 on the DS 3 1.6 BlueHDI 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the DS 3 1.6 BlueHDI 100 hp use?
The DS 3 1.6 BlueHDI 100 hp is fitted with the Bosch EDC17C60 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the DS 3 remain valid after Stage 1?
After remapping the DS 3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the DS 3?
Reading and writing via OBD takes 25-30 minutes on the DS 3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the DS 3?
Before Stage 1 the original of the DS 3 1.6 BlueHDI 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the DS 3 1.6 BlueHDI 100 hp cost?
The remap price for the DS 3 1.6 BlueHDI 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.