Dodge Ram 3.0 CRD EU6 264 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Dodge Ram 3.0 CRD EU6 264 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dodge Ram 3.0 CRD EU6 264 hp ECU
Dodge Ram (2019) 3.0 CRD EU6 264 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 264 to 295 hp (+31 hp, +12%) and torque from 600 to 650 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC17C69, Bosch EDC17C79. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP75H TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Hellcat and Demon are Dodge's top segment, with extreme power output. Dodge shares platforms with Chrysler, Jeep and Ram. Dodge is an American brand of mainstream and performance cars, founded in 1900. On high-output Ram diesels, Stage 1 is especially felt in the torque gain. Chrysler uses Cummins diesels in the commercial segment (Ram). DPF/SCR with AdBlue is standard on modern Chrysler/Ram diesels.
The US Chrysler community has a large pool of ready-made Stage files. HP Tuners is the leading tool for Chrysler/Dodge. High-output Chryslers are Hemi V8s with solid headroom for Stage 1.
Chrysler uses the ZF 8HP on its top models. The TCU rarely needs recalibration up to Stage 1+.
Frequently asked questions
How much horsepower does Stage 1 add for the Dodge Ram 3.0 CRD EU6 264 hp?
The Stage 1 gain for the Dodge Ram 3.0 CRD EU6 264 hp is 31 hp (+12%) over the stock 264 hp, for a total of 295 hp. Torque rises from 600 to 650 Nm (+50 Nm).
What is Stage 1 chip tuning for the Dodge Ram?
Stage 1 chip tuning of the Dodge Ram is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +31 hp with no hardware changes.
Is Stage 1 safe on the high-output Dodge Ram 3.0 CRD EU6 264 hp?
The high-output Dodge Ram 3.0 CRD EU6 264 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Dodge Ram?
Stage 2 on the Dodge Ram 3.0 CRD EU6 264 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Dodge Ram 3.0 CRD EU6 264 hp?
The Dodge Ram 3.0 CRD EU6 264 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C69, Bosch EDC17C79. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HP75H TCU calibrated together with Stage 1?
Yes, on the Dodge Ram 3.0 CRD EU6 264 hp the ZF 8HP75H TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Dodge Ram warranty after chip tuning?
The factory warranty of the Dodge Ram does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Dodge Ram take?
On the Dodge Ram 3.0 CRD EU6 264 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Dodge Ram?
Yes, the original ECU firmware of the Dodge Ram 3.0 CRD EU6 264 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Dodge Ram?
Stage 1 for the Dodge Ram 3.0 CRD EU6 264 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.