Dodge Nitro 4.0 V6 24v 260 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Dodge Nitro 4.0 V6 24v 260 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dodge Nitro 4.0 V6 24v 260 hp ECU
Dodge Nitro (2007) 4.0 V6 24v 260 hp — mass-market petrol engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 260 to 270 hp (+10 hp, +4%) and torque from 360 to 375 Nm (+15 Nm). ECU — Siemens/Continental NGC4. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
The Hemi V8 is Dodge's iconic muscle-car engine. The Hellcat and Demon are Dodge's top segment, with extreme power output. Dodge shares platforms with Chrysler, Jeep and Ram. The Hemi V8 is the proprietary Chrysler/Dodge engine for the top models. High-output Hemi V8s deliver a solid gain with Stage 1. The Chrysler petrol range is mainly the Pentastar V6.
Stage 1 on the Hemi V8 delivers a noticeable gain. The US Chrysler community has a large pool of ready-made Stage files. HP Tuners is the leading tool for Chrysler/Dodge. High-output Chryslers are Hemi V8s with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Dodge Nitro 4.0 V6 24v 260 hp?
Stage 1 for the Dodge Nitro 4.0 V6 24v 260 hp adds +10 hp — power increases from 260 to 270 hp (+4%). Torque rises from 360 to 375 Nm (+15 Nm).
What does a Stage 1 remap of the Dodge Nitro 4.0 V6 24v 260 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Dodge Nitro with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Dodge Nitro?
Stage 1 on the powerful Dodge Nitro 4.0 V6 24v 260 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Dodge Nitro 4.0 V6 24v 260 hp?
Stage 2 for the Dodge Nitro 4.0 V6 24v 260 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Dodge Nitro 4.0 V6 24v 260 hp use?
The Dodge Nitro 4.0 V6 24v 260 hp is fitted with the Siemens/Continental NGC4 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Dodge Nitro remain valid after Stage 1?
After remapping the Dodge Nitro, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dodge Nitro?
Reading and writing via OBD takes 25-30 minutes on the Dodge Nitro. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dodge Nitro?
Before Stage 1 the original of the Dodge Nitro 4.0 V6 24v 260 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dodge Nitro 4.0 V6 24v 260 hp cost?
The remap price for the Dodge Nitro 4.0 V6 24v 260 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.