Dodge Nitro 3.7i V6 214 hp — Stage 1 file (+7 hp)
hp
Stage 1 file for Dodge Nitro 3.7i V6 214 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dodge Nitro 3.7i V6 214 hp ECU
Dodge Nitro (2007) 3.7i V6 214 hp — mass-market petrol engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 214 to 221 hp (+7 hp, +3%) and torque from 319 to 329 Nm (+10 Nm). ECU — Siemens/Continental NGC4. Flashing method: OBD or Bench depending on the unit's protection. The 2007 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Dodge is an American brand of mainstream and performance cars, founded in 1900. Dodge is part of the Stellantis group (formerly FCA). Dodge specialises in muscle cars (Charger, Challenger) and SUVs (Durango). The Hemi V8 is the proprietary Chrysler/Dodge engine for the top models. High-output Hemi V8s deliver a solid gain with Stage 1. The Chrysler petrol range is mainly the Pentastar V6.
Stage 1 on the Hemi V8 delivers a noticeable gain. The US Chrysler community has a large pool of ready-made Stage files. HP Tuners is the leading tool for Chrysler/Dodge. High-output Chryslers are Hemi V8s with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Dodge Nitro 3.7i V6 214 hp?
After Stage 1 the power of the Dodge Nitro 3.7i V6 214 hp rises from 214 to 221 hp, a gain of 7 hp (+3%). Torque rises from 319 to 329 Nm (+10 Nm).
How does Stage 1 differ from stock on the Dodge Nitro?
Stage 1 is a software optimization of the factory ECU firmware of the Dodge Nitro with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +7 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Dodge Nitro?
The high-output Dodge Nitro 3.7i V6 214 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Dodge Nitro 3.7i V6 214 hp?
Stage 2 on the Dodge Nitro 3.7i V6 214 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Dodge Nitro 3.7i V6 214 hp use?
The Dodge Nitro 3.7i V6 214 hp is fitted with the Siemens/Continental NGC4 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Dodge Nitro remain valid after Stage 1?
After remapping the Dodge Nitro, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Dodge Nitro?
Reading and writing via OBD takes 25-30 minutes on the Dodge Nitro. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Dodge Nitro?
Before Stage 1 the original of the Dodge Nitro 3.7i V6 214 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Dodge Nitro 3.7i V6 214 hp cost?
The remap price for the Dodge Nitro 3.7i V6 214 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.