Dodge Durango 6.4 V8 SRT8 477 hp — Stage 1 file (+23 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Dodge Durango 6.4 V8 SRT8 477 hp ECU

Dodge Durango (2011 - WK2) 6.4 V8 SRT8 477 hp — mass-market petrol engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 477 to 500 hp (+23 hp, +5%) and torque from 637 to 668 Nm (+31 Nm). This engine ships with different ECU variants: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2011 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.

Dodge is an American brand of mainstream and performance cars, founded in 1900. Dodge is part of the Stellantis group (formerly FCA). Dodge specialises in muscle cars (Charger, Challenger) and SUVs (Durango). The Hemi V8 is the proprietary Chrysler/Dodge engine for the top models. The top Hemi Hellcat offers significant potential with hardware. The Chrysler petrol range is mainly the Pentastar V6.

The Hellcat confidently reaches Stage 2 with hardware. The US Chrysler community has a large pool of ready-made Stage files. HP Tuners is the leading tool for Chrysler/Dodge. Top Chrysler/Dodge Hellcat engines sit at the power ceiling of the American mass market.

The TCU rarely needs recalibration up to Stage 1+. Hellcat models use a reinforced ZF 8HP. Chrysler uses the ZF 8HP on its top models.

Frequently asked questions

What is the Stage 1 effect on the Dodge Durango 6.4 V8 SRT8 477 hp?

The Stage 1 gain for the Dodge Durango 6.4 V8 SRT8 477 hp is 23 hp (+5%) over the stock 477 hp, for a total of 500 hp. Torque rises from 637 to 668 Nm (+31 Nm).

What is Stage 1 chip tuning for the Dodge Durango?

Stage 1 is a software optimization of the factory ECU firmware of the Dodge Durango with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +23 hp with no hardware changes.

Does Stage 1 make sense on the Dodge Durango 6.4 V8 SRT8 477 hp with this much power?

Stage 1 for the Dodge Durango 6.4 V8 SRT8 477 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.

What is Stage 2 for the Dodge Durango 6.4 V8 SRT8 477 hp?

Stage 2 on the Dodge Durango 6.4 V8 SRT8 477 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Which control units is the Dodge Durango 6.4 V8 SRT8 477 hp built with?

The Dodge Durango 6.4 V8 SRT8 477 hp comes with 2 ECU variants: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. Calibration is done for the specific unit after the revision is identified.

What does remapping the ZF 8HP70 gearbox give on the Dodge Durango 6.4 V8 SRT8 477 hp?

The ZF 8HP70 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.

Does the factory warranty of the Dodge Durango remain valid after Stage 1?

After remapping the Dodge Durango, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Dodge Durango?

Reading and writing via OBD takes 25-30 minutes on the Dodge Durango. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Dodge Durango?

Before Stage 1 the original of the Dodge Durango 6.4 V8 SRT8 477 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Dodge Durango 6.4 V8 SRT8 477 hp cost?

The remap price for the Dodge Durango 6.4 V8 SRT8 477 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno