Dodge Durango 5.7i V8 HEMI 365 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Dodge Durango 5.7i V8 HEMI 365 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dodge Durango 5.7i V8 HEMI 365 hp ECU
Dodge Durango (2011 - WK2) 5.7i V8 HEMI 365 hp — mass-market petrol engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 365 to 380 hp (+15 hp, +4%) and torque from 530 to 560 Nm (+30 Nm). This engine ships with different ECU variants: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2011 — a Tricore platform without strong protection; OBD access works.
Dodge is part of the Stellantis group (formerly FCA). Dodge specialises in muscle cars (Charger, Challenger) and SUVs (Durango). The Hemi V8 is Dodge's iconic muscle-car engine. The top Hemi Hellcat offers significant potential with hardware. The Chrysler petrol range is mainly the Pentastar V6. The Hemi V8 is the proprietary Chrysler/Dodge engine for the top models.
The US Chrysler community has a large pool of ready-made Stage files. HP Tuners is the leading tool for Chrysler/Dodge. The Hellcat confidently reaches Stage 2 with hardware. Top Chrysler/Dodge Hellcat engines sit at the power ceiling of the American mass market.
Hellcat models use a reinforced ZF 8HP. Chrysler uses the ZF 8HP on its top models. The TCU rarely needs recalibration up to Stage 1+.
Frequently asked questions
What power gain do you get after chip tuning the Dodge Durango 5.7i V8 HEMI 365 hp?
Stage 1 for the Dodge Durango 5.7i V8 HEMI 365 hp adds +15 hp — power increases from 365 to 380 hp (+4%). Torque rises from 530 to 560 Nm (+30 Nm).
What does a Stage 1 remap of the Dodge Durango 5.7i V8 HEMI 365 hp include?
Stage 1 chip tuning of the Dodge Durango is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +15 hp with no hardware changes.
What is the Stage 1 potential of the Dodge Durango 5.7i V8 HEMI 365 hp?
On the top-spec Dodge Durango 5.7i V8 HEMI 365 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the Dodge Durango?
Stage 2 for the Dodge Durango 5.7i V8 HEMI 365 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Dodge Durango 5.7i V8 HEMI 365 hp?
The Dodge Durango 5.7i V8 HEMI 365 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HP70 TCU calibrated together with Stage 1?
Yes, on the Dodge Durango 5.7i V8 HEMI 365 hp the ZF 8HP70 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Dodge Durango warranty after chip tuning?
The factory warranty of the Dodge Durango does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Dodge Durango take?
On the Dodge Durango 5.7i V8 HEMI 365 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Dodge Durango?
Yes, the original ECU firmware of the Dodge Durango 5.7i V8 HEMI 365 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Dodge Durango?
Stage 1 for the Dodge Durango 5.7i V8 HEMI 365 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.