Dodge Avenger 3.6 Pentastar V6 296 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Dodge Avenger 3.6 Pentastar V6 296 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dodge Avenger 3.6 Pentastar V6 296 hp ECU
Dodge Avenger (2006) 3.6 Pentastar V6 296 hp — mass-market petrol engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 296 to 311 hp (+15 hp, +5%) and torque from 350 to 367 Nm (+17 Nm). This engine ships with different ECU variants: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: ZF 8HP45-845RE, ZF 9HP48-948TE — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. The 2006 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Dodge specialises in muscle cars (Charger, Challenger) and SUVs (Durango). The Hemi V8 is Dodge's iconic muscle-car engine. The Hellcat and Demon are Dodge's top segment, with extreme power output. The Chrysler petrol range is mainly the Pentastar V6. The Hemi V8 is the proprietary Chrysler/Dodge engine for the top models. High-output Hemi V8s deliver a solid gain with Stage 1.
HP Tuners is the leading tool for Chrysler/Dodge. Stage 1 on the Hemi V8 delivers a noticeable gain. The US Chrysler community has a large pool of ready-made Stage files. High-output Chryslers are Hemi V8s with solid headroom for Stage 1.
Chrysler uses the ZF 8HP on its top models. The TCU rarely needs recalibration up to Stage 1+.
Frequently asked questions
How much does the power of the Dodge Avenger 3.6 Pentastar V6 296 hp increase after Stage 1?
After Stage 1 the power of the Dodge Avenger 3.6 Pentastar V6 296 hp rises from 296 to 311 hp, a gain of 15 hp (+5%). Torque rises from 350 to 367 Nm (+17 Nm).
How does Stage 1 differ from stock on the Dodge Avenger?
Stage 1 on the Dodge Avenger 3.6 Pentastar V6 296 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
What does Stage 1 give on the powerful Dodge Avenger 3.6 Pentastar V6 296 hp?
The high-output Dodge Avenger 3.6 Pentastar V6 296 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Dodge Avenger 3.6 Pentastar V6 296 hp?
Stage 2 on the Dodge Avenger 3.6 Pentastar V6 296 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Dodge Avenger 3.6 Pentastar V6 296 hp have?
The Dodge Avenger 3.6 Pentastar V6 296 hp has 2 ECU variants: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Which TCUs are found on the Dodge Avenger 3.6 Pentastar V6 296 hp?
The Dodge Avenger 3.6 Pentastar V6 296 hp was fitted with different automatic-transmission units: ZF 8HP45-845RE, ZF 9HP48-948TE. All are supported via Bench reading; the Stage 1 calibration is done for the specific TCU after the revision is identified.
Does Stage 1 void the warranty on the Dodge Avenger?
Stage 1 on the Dodge Avenger voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Dodge Avenger 3.6 Pentastar V6 296 hp done?
The full remap cycle for the Dodge Avenger — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Dodge Avenger?
The original Dodge Avenger ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Dodge Avenger 3.6 Pentastar V6 296 hp?
The cost of Stage 1 for the Dodge Avenger 3.6 Pentastar V6 296 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.