Deutz Agrotron X 720 262hp (193kW) 1052Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for Deutz Agrotron X 720 262hp (193kW) 1052Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron X 720 262hp (193kW) 1052Nm ECU
Deutz Agrotron (I) X 720 262hp (193kW) 1052Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 262 to 290 hp (+28 hp, +11%) and torque from 1052 to 1112 Nm (+60 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Deutz — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Deutz Agrotron X 720 262hp (193kW) 1052Nm?
Stage 1 for the Deutz Agrotron X 720 262hp (193kW) 1052Nm adds +28 hp — power increases from 262 to 290 hp (+11%). Torque rises from 1052 to 1112 Nm (+60 Nm).
What does a Stage 1 remap of the Deutz Agrotron X 720 262hp (193kW) 1052Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz Agrotron with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Deutz Agrotron?
Stage 1 on the powerful Deutz Agrotron X 720 262hp (193kW) 1052Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Deutz Agrotron X 720 262hp (193kW) 1052Nm?
Stage 2 for the Deutz Agrotron X 720 262hp (193kW) 1052Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Deutz Agrotron remain valid after Stage 1?
After remapping the Deutz Agrotron, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz Agrotron?
Reading and writing via OBD takes 25-30 minutes on the Deutz Agrotron. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz Agrotron?
Before Stage 1 the original of the Deutz Agrotron X 720 262hp (193kW) 1052Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz Agrotron X 720 262hp (193kW) 1052Nm cost?
The remap price for the Deutz Agrotron X 720 262hp (193kW) 1052Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.