Deutz Agrotron X 710 219hp (161kW) 961Nm — Stage 1 file (+18 hp)
hp
Stage 1 file for Deutz Agrotron X 710 219hp (161kW) 961Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron X 710 219hp (161kW) 961Nm ECU
Deutz Agrotron (I) X 710 219hp (161kW) 961Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 219 to 237 hp (+18 hp, +8%) and torque from 961 to 824 Nm (+-137 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Deutz — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Deutz Agrotron X 710 219hp (161kW) 961Nm reach after a remap?
Stage 1 for the Deutz Agrotron X 710 219hp (161kW) 961Nm adds +18 hp — power increases from 219 to 237 hp (+8%). Torque rises from 961 to 824 Nm (+-137 Nm).
What does a Stage 1 remap of the Deutz Agrotron X 710 219hp (161kW) 961Nm include?
Stage 1 on the Deutz Agrotron X 710 219hp (161kW) 961Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +18 hp with no hardware changes.
What does Stage 1 give on the powerful Deutz Agrotron X 710 219hp (161kW) 961Nm?
Stage 1 on the powerful Deutz Agrotron X 710 219hp (161kW) 961Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Deutz Agrotron X 710 219hp (161kW) 961Nm?
Stage 2 for the Deutz Agrotron X 710 219hp (161kW) 961Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrotron X 710 219hp (161kW) 961Nm done?
The full remap cycle for the Deutz Agrotron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrotron?
The original Deutz Agrotron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrotron X 710 219hp (161kW) 961Nm?
The cost of Stage 1 for the Deutz Agrotron X 710 219hp (161kW) 961Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.