Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm — Stage 1 file (+34 hp)
hp
Stage 1 file for Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm ECU
Deutz Agrotron (I) TTV 630 6.0 203hp (149kW) 746Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 203 to 237 hp (+34 hp, +17%) and torque from 746 to 824 Nm (+78 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Deutz — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm?
The Stage 1 gain for the Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm is 34 hp (+17%) over the stock 203 hp, for a total of 237 hp. Torque rises from 746 to 824 Nm (+78 Nm).
What is Stage 1 chip tuning for the Deutz Agrotron?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz Agrotron with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +34 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Deutz Agrotron?
The high-output Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm?
Stage 2 on the Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Deutz Agrotron remain valid after Stage 1?
After remapping the Deutz Agrotron, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz Agrotron?
Reading and writing via OBD takes 25-30 minutes on the Deutz Agrotron. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz Agrotron?
Before Stage 1 the original of the Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm cost?
The remap price for the Deutz Agrotron TTV 630 6.0 203hp (149kW) 746Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.