Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm — Stage 1 file (+35 hp)
hp
Stage 1 file for Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm ECU
Deutz Agrotron (I) TTV 1160 6.0 160hp (118kW) 615Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 160 to 195 hp (+35 hp, +22%) and torque from 615 to 750 Nm (+135 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Deutz среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm?
The Stage 1 gain for the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm is 35 hp (+22%) over the stock 160 hp, for a total of 195 hp. Torque rises from 615 to 750 Nm (+135 Nm).
What is Stage 1 chip tuning for the Deutz Agrotron?
Stage 1 on the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the TTV 1160 6.0 160hp (118kW) 615Nm?
Stage 1 on the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm?
Stage 2 on the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm done?
The full remap cycle for the Deutz Agrotron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrotron?
The original Deutz Agrotron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm?
The cost of Stage 1 for the Deutz Agrotron TTV 1160 6.0 160hp (118kW) 615Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.