Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm — Stage 1 file (+21 hp)
hp
Stage 1 file for Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm ECU
Deutz Agrotron (I) K90 4.0 R4 84hp (62kW) 372Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 84 to 105 hp (+21 hp, +25%) and torque from 372 to 440 Nm (+68 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Deutz — компактная техника; Stage 1 безопасный.
Frequently asked questions
How much does the power of the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm increase after Stage 1?
Stage 1 chip tuning on the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm boosts engine output by 21 hp: from 84 to 105 hp. Torque rises from 372 to 440 Nm (+68 Nm).
What changes in the Deutz Agrotron ECU after Stage 1?
Stage 1 on the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +21 hp with no hardware changes.
Is Stage 1 safe for the low-output Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm?
Yes, Stage 1 on the low-output Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm?
Stage 2 for the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm done?
The full remap cycle for the Deutz Agrotron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrotron?
The original Deutz Agrotron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm?
The cost of Stage 1 for the Deutz Agrotron K90 4.0 R4 84hp (62kW) 372Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.