Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm — Stage 1 file (+43 hp)
hp
Stage 1 file for Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm ECU
Deutz Agrotron (I) K100 4.0 R4 95hp (70kW) 396Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 95 to 138 hp (+43 hp, +45%) and torque from 396 to 515 Nm (+119 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Deutz — компактная техника; Stage 1 безопасный.
Frequently asked questions
How much does the power of the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm increase after Stage 1?
After Stage 1 the power of the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm rises from 95 to 138 hp, a gain of 43 hp (+45%). Torque rises from 396 to 515 Nm (+119 Nm).
How does Stage 1 differ from stock on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +43 hp with no hardware changes.
Is Stage 1 safe for the low-output Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm?
Stage 1 on the base Deutz Agrotron is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm?
Stage 2 on the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm done?
The full remap cycle for the Deutz Agrotron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrotron?
The original Deutz Agrotron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm?
The cost of Stage 1 for the Deutz Agrotron K100 4.0 R4 95hp (70kW) 396Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.