Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm — Stage 1 file (+65 hp)
hp
Stage 1 file for Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm ECU
Deutz Agrotron (I) 265 7.1 MK 250hp (184kW) 1028Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 250 to 315 hp (+65 hp, +26%) and torque from 1028 to 1230 Nm (+202 Nm).
Deutz engines are used across a wide range of agricultural and special machinery. Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Deutz — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm reach after a remap?
The Stage 1 gain for the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm is 65 hp (+26%) over the stock 250 hp, for a total of 315 hp. Torque rises from 1028 to 1230 Nm (+202 Nm).
What is Stage 1 chip tuning for the Deutz Agrotron?
Stage 1 on the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +65 hp with no hardware changes.
What does Stage 1 give on the powerful Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm?
The high-output Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm?
Stage 2 on the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Deutz Agrotron?
Stage 1 on the Deutz Agrotron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm done?
The full remap cycle for the Deutz Agrotron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Deutz Agrotron?
The original Deutz Agrotron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm?
The cost of Stage 1 for the Deutz Agrotron 265 7.1 MK 250hp (184kW) 1028Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.